High-Performance Orv Open Rack LNG Vaporizer

• Customization: Available
• Application Fields: Chemical
• Certification: ISO, GB, ASME
• Model NO.: ORV-70000
• Noise Level: Low
• Purpose: Viprozation Liquid
• Capacity: 180t/H
• LNG Side Operation Pressure: 8.88MPa
• Type: Orv
• LNG Side Design Pressure: 13.9MPa
• Seawater Flowrate: ~6550m3/H
• Load Adjustment Range: 10~110%
• Machine Size: Large
• Usage: LNG
• Transport Package: Normal Package
• Specification: QQ-180T
• Trademark: CK GAS TECHNOLOGY
• Origin: China
• Production Capacity: 60000 Units Per Year

Product Description

Introduction
OPEN RACK VAPORIZER(shorten as ORV)is a vaporizer which takes sea water as heat source  to vaporize LNG; It is used for LNG accepting station, the largest LNG flow rate be dealt with is  ~200t/h.
 
It is a typical higher flow LNG vaporizer. The seawater enters the top of the vaporizer and is runs over the aluminum tubes. The LNG flows up and is converts from a liquid into a gas. The benefit of using heat from the seawater is that this energy is for free and there is no further CO2emission for re-gasifying the LNG. The water is gathered in the basin at the bottom of the vaporizer tubes before being returned to the sea.
 
Since 2011, SASPG is doing nationalization study & development on ORV in the aspects of flow& heat transfer, structure, material, and manufacturing process etc.

Product Photos






Advantages
1. Take sea water as heat medium 
2. Treating capacity is large, and running on a base load. Capacity can be adjusted from 0~100% load range according to different requirements and the operation is safe. 
3. Broadly used for LNG accepting station

Process Flow
The main part of the ORV is the heat transfer panels, consisting of the high-performance heat transfer tubes made of aluminum alloy.
The ORV uses seawater as a heat source. While LNG goes up inside the panels and seawater flows down over the panel surface (B), LNG is heated by seawater and converted to gas

Main process parameters for ORV

LNG capacity	180T/h(100% work condition)
LNG side operation pressure	8.88MPa
LNG side design pressure	13.9MPa
LNG  inlet temperature	-158ºC
NG outlet temperature	not lower than 4ºC
Seawater flow rate	~6550m3/h
Sea water inlet & outlet temperature difference	not more than 5ºC
Load adjustment range	10~110%

WHAT WE CAN SUPPLY
Hangzhou Chuankong General Equipment Co., Ltd. is a wholly owned subsidiary of Sichuan Air Separation Plant Group Company-the second largest gas equipment producer in China.  

We specialize in producing air separation plants, CO2 recovery plants, cryogenic liquid storage tanks, ISO tanks, semi-trailer tankers, vaporizers, gas filling stations, cylinders and dewars, dry ice machines, compressors and cryogenic pumps etc.