Alkaline and PEM water electrolysis for hydrogen generation
H2 generation
Long-term experience of the products and technologies in hydrogen generation by water electrolysis.
We have manufactured more than 1000 sets of H2 electrolyzer plant with the highest reliability and advanced technology, successfully supplied to both domestic and international customers.
Top manufacturer for alkaline and PEM water electrolysis as per hydrogen generation
Alkaline-type hydrogen systems
ADVANTAGES OFALK ELECTROLYZER stack output pressure 1.5-3.2 Mpa (without compresor) Large capacity of single stack (2000Nm3/h = 10MW) Large capacity of single purification unit (8000Nm3/h) High efficiency DC power consumption :4.3~4.6kwh/Nm3 H2 AC power consumption :4.6~5.0kwh/Nm3 H2 Independent intellectual property rights Fully automatic operation Less construction area and investment cost Less operation and maintenance costs PEM-type hydrogen systems ADVANTAGES OF PERIC PEM ELECTROLYZER Both normal and pressurized stack (0-4.0 MPa) Large capacity of single stack (300Nm3/h = 1.5MW) Large capacity of single system (1.5MW×4 stacks=6MW) Area saving (1/5 compared with ALK) High efficiency DC power consumption ≤4.3kwh/Nm3 H2 AC power consumption ≤5.0kwh/Nm3 H2 Independent intellectual property rights Fully automatic operation
The amount of hydrogen produced is 50 ~ 60000 Nm3 / h. It has the advantages of low investment cost, low operation cost, mild reaction conditions and hydrogen purity of 99.999%;
Various hydrogen rich gases, such as propane dehydrogenation off gas, polysilicon off gas,synthetic ammonia off gas,coke oven gas,chlor-alkali off gas etc., are pretreated after pressurization according to the actual situation. After removing the impurities unsuitable for PSA treatment, the product hydrogen is output after PSA purification.